DG4162 160 MHZ ARBITRARY WAVEFORM GENERATOR

The DG4000 Series waveform generators are utilized in a wide range of applications because of the many functions combined into one instrument. With capabilities including Function Generation, Arbitrary Waveform Generation, Pulse Generation, Harmonic Generation, Analog/Digital Modulation source, and Counter the DG4000 series can handle a broad array of signal emulation applications from near DC up to 60 or even 200 MHz depending on model and function. The DG4000 utilizes Direct Digital Synthesizer (DDS) technology which delivers stable, precise, low distortion signals. The sleek, upright design features a high resolution 7" display screen, while the user-friendly interface design and panel layout improves efficiency.
Manufacturer part number: DG4162
Manufacturer: RIGOL
4,100.00 (AED)

Features

  • Maximum frequency 160MHz
  • Two fully functional and independent channels
  • 500MSa/s sample rate
  • 14-bit vertical resolution
  • ±2ppm frequency stability
  • Phase noise <-115dBc/Hz @ 10kHz (f = 10MHz)
  • 150 built-in arbitrary waveforms
  • Intuitive arbitrary waveform editing software for PC
  • 16kpts arbitrary waveform length per channel
  • Built-in 7 digit counter up to 200MHz
  • Built-in 16th order harmonic generator
  • 7" LCD display (800 x 480)
  • Supported modulation... AM, FM, PM, ASK, FSK, PSK,BPSK, QPSK, 3FSK, 4FSK, OSK & PWM
  • Connectivity... LAN(LXI), USB Host & Device
  • Supplied with... BNC cable, USB cable, UK & European mains leads, quick guide
  • Optional Ultra Station Advanced PC software... Additional functionality for Ultra Station - Maths functions, digital filters & windowing
  • Other options include... 10W power amplifier, 40dB attenuator, rack mount kit, soft carry bag, RCL standard calibration, RCL UKAS calibration

 

SPECIFICATIONS

Model DG4062 DG4102 DG4162 DG4202
Maximum Frequency 60MHz 100MHz 160MHz 200MHz
Channels 2
Sample Rate 500MSa/s
Waveforms Basic Sine, Square, Ramp, Pulse, Noise, Harmonics
Built-In Arbitrary 150-off, including: Sinc, Exponential Rise, Exponential Fall, 
ECG, Gauss, HaverSine, Lorentz, Dual-Tone, DC
Frequency Characteristics Sine 1μHz to 60MHz 1μHz to 100MHz 1μHz to 160MHz 1μHz to 200MHz
Square 1μHz to 25MHz 1μHz to 40MHz 1μHz to 50MHz 1μHz to 60MHz
Ramp 1μHz to 1MHz 1μHz to 3MHz 1μHz to 4MHz 1μHz to 5MHz
Pulse 1μHz to 15MHz 1μHz to 25MHz 1μHz to 40MHz 1μHz to 50MHz
Harmonic 1μHz to 30MHz 1μHz to 50MHz 1μHz to 80MHz 1μHz to 100MHz
Noise (-3dB) 60MHz Bandwidth 80MHz Bandwidth 120MHz Bandwidth 120MHz Bandwidth
Arbitrary Waveform 1μHz to 15MHz 1μHz to 25MHz 1μHz to 40MHz 1μHz to 50MHz
Resolution 1μHz
Accuracy ±2ppm, 18⁰C to 28⁰C
Sine Wave 
Spectral Purity
Harmonic Distortion <-60dBc typical (DC to 10MHz) 
<-55dBc typical (1MHz to 10MHz) 
<-50dBc typical (10MHz to 100MHz) 
<-40dBc typical (100MHz to 200MHz)
Total Harmonic Distortion <0.1% (10Hz to 20kHz, 0dBm)
Spurious (Non-Harmonic) <-65dBc (f ≤ 10MHz) 
<-65dBc + 6dB/octave (f > 10MHz)
Phase Noise <-115dBc/Hz @ 10kHz offset (f = 10MHz, 0dBm)
Square Wave Rise / Fall Time <12ns typical (1Vpp) <10ns typical (1Vpp) <8ns typical (1Vpp)
Overshoot ≤3% typical (1Vpp)
Duty Cycle 20.0% to 80.0%, f ≤ 10MHz 
40.0% to 60.0%, 10MHz < f ≤ 40MHz 
50.0% Fixed, f > 40MHz
Non-Symmetry 1% of the period + 5ns
Jitter (rms) 2ppm + 500ps typical (f ≤ 5MHz) 
500ps (f > 5MHz)
Ramp Waveform Linearity ≤1% of peak output, typical
Symmetry 0% to 100%
Pulse Period 66.7ns to 1,000,000s 40ns to 1,000,000s 25ns to 1,000,000s
Pulse Width ≥18ns ≥12ns ≥10ns
Rising / Falling Edge ≥11ns ≥7ns ≥5ns
Overshoot <3% typical (1Vpp)
Jitter (rms) 2ppm +500ps typical (f ≤ 5MHz, 1Vpp) 
500ps (f > 5MHz, 1Vpp)
Arbitrary Waveform Length 16kpts
Vertical Resolution 14 bits
Sample Rate 500MSa/s
Min. Rise / Fall Time <5ns typical (1 Vpp)
Jitter (rms) 2ppm + 500ps typical (f ≤ 5MHz, 1Vpp) 
500ps (f > 5MHz, 1Vpp)
Interpolation Method Off, Linear
Editing Mode Point Edit, Block Edit
Harmonic Generator Harmonic Order ≤16
Harmonic Type Even Harmonic, Odd Harmonic, Order Harmonic, User
Harmonic Amplitude The amplitude of each harmonic can be set independently
Harmonic Phase The phase of each harmonic can be set independently
Output Characteristics 
(into 50Ω)
Amplitude Range 1mVpp to 10Vpp 
(f ≤ 20MHz) 

1mVpp to 5.0Vpp 
(f ≤ 60MHz)
1mVpp to 10Vpp 
(f ≤ 20MHz) 

1mVpp to 5.0Vpp 
(f ≤ 60MHz) 

1mVpp to 2.5Vpp 
(f ≤ 100MHz)
1mVpp to 10Vpp 
(f ≤ 20MHz) 

1mVpp to 5.0Vpp 
(f ≤ 60MHz) 

1mVpp to 2.5Vpp 
(f ≤ 120MHz) 

1mVpp to 1.0Vpp 
(f ≤ 160MHz)
1mVpp to 10Vpp 
(f ≤ 20MHz) 

1mVpp to 5.0Vpp 
(f ≤ 60MHz) 

1mVpp to 2.5Vpp 
(f ≤ 120MHz) 

1mVpp to 1.0Vpp 
(f ≤ 200MHz)
Amplitude Resolution 1mVpp or 3 digits
Amplitude Accuracy ±1% of the set value ±2mV, typical
Amplitude Flatness ±0.1dB (f ≤ 20MHz) 
±0.2dB (f ≤ 60MHz)
±0.1dB (f ≤ 20MHz) 
±0.2dB (f ≤ 60MHz) 
±0.4dB (f ≤ 100MHz)
±0.1dB (f ≤ 20MHz) 
±0.2dB (f ≤ 60MHz) 
±0.4dB (f ≤ 100MHz) 
±0.8dB (f ≤ 160MHz)
±0.1dB (f ≤ 20MHz) 
±0.2dB (f ≤ 60MHz) 
±0.4dB (f ≤ 100MHz) 
±0.8dB (f ≤ 160MHz) 
±1.0dB (f ≤ 200MHz)
Amplitude Units Vpp, Vrms, dBm
Offset Range ±5V
Offset Accuracy 1% of the set value + 5mV + 0.5% of the amplitude
Impedance 50Ω
Protection Short-Circuit Protection - The output is disabled automatically when an overload occurs
Modulation Characteristics AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, 3FSK, 4FSK, OSK, PWM
Burst Characteristics Carrier Waveforms Sine, Square, Ramp, Pulse, Noise, Arb (except DC)
Carrier Frequency 2mHz to 60MHz 2mHz to 100MHz
Burst Count 1 to 1,000,000 or infinite
Start / Stop Phase 0⁰ to 360⁰
Internal Period 2μs to 500s
Gated Source External Trigger
Trigger Source Internal, External or Manual
Trigger Delay 0ns to 85s
Frequency Counter Function Frequency, Period, Positive / Negative Pulse Width, Duty Cycle
Frequency Resolution 7 digits / second
Frequency Range 1μHz to 200MHz