DS-1250C 250MHz Digital Oscilloscope

EZ Digital DS-1250 250MHz Digital Oscilloscope are featured with DC to 250MHz, maximum 100MS/s realtime sampling per channel (Maximum of one channel: 200MS/s), equivalent sampling rate of 25GS/s. Its 16bit high speed microprocessor adoption enables to acquire maximum 100,0000 points per second and prompt update the picture on the screen. EZ Digital DS-1250 250MHz Digital Oscilloscope basic memory capacity is 32KBytes and captured waveforms can be zoomed in and analyzed in detail. Also its built-in 10ns peak detection circuit enables to capture high frequency noise at a low speed time/div and magnify and analyze it using the zoom-in function. It can save up to 10 waveforms and provides diversified analysis function like FFT which is available at high-end products.
Manufacturer part number: DS-1250C
Manufacturer: EZ DIGITAL CO . LTD
9,500.00 (AED)

SPECIFICATIONS

Convenient
Functions
-Long Memory Max. 32KBytes/CH for flexible Waveform Zoom In/Out
-Direct Single Trigger Capture Function using a hot-key
-Simultaneous 5 Waveform informations
-Auto Measurement and FFT Analysis
-Auto Trigger Level Setting to 50%
-Saving 10 Waveforms & setup parameters
-Convenient inserting interface card for RS-232C, Hardcopy and USB
ACQUISITION
Max. sample rate
 
200MSPS for one channel only, 100MSPS/CH (real time),
25GSPS/CH (equivalent)
Record length
 
Long Memory Max. 32kBytes/CH, Wide Waveform Zoom In/Out
Peak defect
 
Capture & displays event as narrow as 10ns GLITCH
VERRICAL
 
Frequency
bandwidth
DC-250MHz
Input channel CH1, CH2
VOLTS / DIV 2mV.DIV~5V/DIV
Input impedence 1 Mohm // Approx. 20pF
Max. input volt 300V (DC+AC Peak) (AC < 1kHz)
Accuracy 3%
Input coupling DC, AC, GND
Rising time Approx. 2.3ns
MATH
 
-Arithmetric(ADD, SUBSTRACT, INVERSION)
-FFT : Hamming, Hanning and Retangular window
HORIZONTAL
 
TIME / DIV
 
Equivalent 2ns/div ~ 0.1μs
Realtime 0.25 μs/div~0.1s/div
Roll mode 0.2s/div~5s/div
Resolution
 
80ps
Accuracy
 
0.01%
Pre trigger
 
Max. 10div
magnification
 
ZOOM IN/OUT
TRIGGER
 
Mode AUTO, NORMAL, SINGLE
Coupling DC, AC, LF REJECT, HF TRJECT
Type EDGE, TV
SLOPE + or -
Level Manual setting or Automatic 50% setting
Source CH1, CH2, EXT, LINE
Sensitivity
 
TRIGGER FREQUENCY SENSITIVITY
5mV~5V/div 2mV/DIV
INTERNAL
(CH1, CH2)
 
DC~20MHz 0.5 DIV 0.5 DIV
20MHz~80MHZ 1.5 DIV  
80MHz~150MHz 2.0 DIV
EXTERNAL DC ~ 10MHz 0.2 Vp-p
DISPLAY
 
5.7" MONO LCD (320 X 240)
MENU
 
Display
 
Type Dots, Vectors
Format X-Y, Y-T
GRID Full, Cross, Board
Contrast Control possible
SAVE / RECALL
 
10 Setup, 10 Waveforms
This function is able to save waveform and setting state of present working environment and recall by the user.
Factory setup recall
UTILITY
 
Self Calibration
System condition
Cursor
 
Type : time, frequency, Voltage
Source : CH1, CH2
Measure
 
Max. 5 parameter auto measurement
(pk-pk, RMS, Mean, Frequency, Rising time, Falling time, period, Positive width, Negative width, Duty)
HOT-KEY
 
AUTO SET VARTICAL, HORISONAL & Trigger setting
RUN/STOP Waveform hole
SINGLE Bandwidth 10MHz
HARDCOPY Hardcopy through printer port or RS-232 port for thermal printer
POWER
 
Power supply 90V AC ~ 250V AC
Frequency 48Hz ~ 440Hz
Power consumption 30W
WEIGHT -6kg
SIZE
 
-338(W) x 167(H) x 371(L)
EMC
 
-CE (EN55011, EN50082-1)
SAFETY -CE (EN61010-1), meet UL3111-1