GOS-6112 : 2CH 100 MHz ANALOG OSCILLOSCOPE WITH DELAYED SWEEP AND CURSOR READOUT 100MHz New

GOS-6112 : 2CH 100 MHz ANALOG OSCILLOSCOPE WITH DELAYED SWEEP AND CURSOR READOUT 100MHz

Price: AED 5000.00

  • SKU: GOS-6112
  • Manufacturer: Goodwill Instek
  • Stock: In Stock
  • Warranty: Contact us for more details
  • Category: Uncategorized

The GOS-6100 Series is a 100MHz, two-channel, dual-sweep, portable oscilloscope for general purpose use. A microprocessor-based operating system controls most of the functions of the instrument, in cluding cursor readout and digitized panel setting. On-screen alphanumeric readout and cursor function for voltage, time, frequency and phase measurement provide extraordinary operational convenience. The advance Time Base Auto-rang fun ction conveniently acquires waveforms at the push of button (GOS-6103/ 6103C). Ten different user defined instrument settings (GOS-6103/ 6103C) can be saved and recalled without restriction. The vertical deflection system has two input channels. Each channel has 11 basic deflection factors from 2mV to 5V per division. The horizontal deflection system provides single, dual or delayed sweeps from 0.5s to 50ns per division (delayed sweep, 50ms to 50ns per division). The trigger system provides stable triggering over the full bandwidth of the vertical deflection system.

GOS-6112 : 2CH 100 MHz Analog OSCILLOSCOPE

FEATURES

* 100MHz Bandwidth, Dual Channel, Delayed Sweep
* Built-In 6 digits Universal Counter (GOS-6103C)
* Cursor Readout with 7 Measurements
* 10 Sets Memory for Front Panel Setting Save & Recall (GOS-6103/GOS-6103C)
* Panel Setup Lock of Digital-Control Functions
* Time Base Auto-range (GOS-6103/GOS-6103C)
* Buzzer Alarm
* LED Indicators
* TV Synchronization
* Trigger Signal Output
* Z-Axis Modulation Input
* SMD Technology, High Stability and Reliability


CRT
Type6-inch rectangular type with internal graticule;
0%, 10%, 90% and 100% markers.
8 x 10 div (1 div = 1 cm)
Accelerating Potential16kV approx. (GOS-6103/GOS-6103C), 12 kV approx.(GOS-6112)
IlluminationContinuously adjustable (GOS-6103/GOS-6103C)
Z-axis inputCoupling : DC
Sensitivity: 5V or more
Maximum input voltage : 30V (DC + AC peak) at 1kHz or less 
Bandwidth : DC ~ 5 MHz
VERTICAL SYSTEM
Sensitivity2mV~5V/div, 11 step in 1-2-5 sequence
Sensitivity Accuracy≦3% (5div at the center of display)
Vernier Vertical SensitivityContinuously variable to 1/2.5 or less of panel-indicate value
Bandwidth(-3dB)DC~100MHz (2mV/div:DC~20MHz)
Rise Time3.5ns (2mV/div:17.5ns)
Signal DelayLeading edge can be monitored
Max. Input Voltage400V(DC+AC peak) at 1kHz or less
Input CouplingAC, DC, GND
Input Impedance1MΩ±2% // approx. 25pF
Vertical ModeCH1,CH2,DUAL(CHOP/ALT), ADD, CH2 INV.
Bandwidth Limited20MHz
Common-Mode Rejection Ratio50:1 or better at 50kHz
Dynamic Range8 div at 60MHz 
5 div at 100MHz
HORIZONTAL SYSTEM
Horizontal Modes MAIN(A), ALT, DELAY(B)
A(main) Sweep Time50ns~0.5s/div, continuously variable (UNCAL)
B(delay) Sweep Time50ns~50ms/div
Accuracy±3% (±5% at x 10 MAG)
Sweep Magnificationx 10 (maximum sweep time 5nS/div)
Hold Off TimeVariable
Delay Time1μs~5s
Delay JitterBetter than 1:20000
Alternate SeparationVariable
TRIGGER
Trigger ModesAUTO, NORM,TV
Trigger SourceCH1, CH2, LINE, EXT
Trigger CouplingAC, DC, HFR, LFR
Trigger Slope"+" or "-" polarity or TVsync polarity
Trigger Sensitivity
ModeFrequencyINTEXT
AUTO10Hz~20MHz
20MHz~100MHz
0.35div
1.5div
50mV
150mV
NORMDC~20MHz
20MHz~100MHz
0.35div
1.5div
50mV
150mV
TVsync singnal1div200mVpp
TV syncTV-V, TV-H
Max. External Input Voltage400V (DC+AC peak) at 1kHz
External Input Impedance1MΩ±5% // approx.25pF
X-Y OPERATION
Mode

X-axis: selectable CH1, CH2, EXT 
Y-axis: selectable CH1, CH2, CH1 and CH2

Sensitivity Accuracy2mV~5V/div±3% ; EXT : 0.1V/div±5%
X-axis BandwidthDC~500kHz(-3dB)
Phase Error3° or less from DC~50kHz
OUTPUT SIGNAL
CH1 Signal OutputVoltage: approx. 25mV/div into 50Ω
Frequency response : DC ~ 10MHz
Calibrator Output1kHz Square wave, 2Vpp±2%
CURSOR READOUT FUNCTION
Cursor Measurement FunctionΔV, ΔV%, ΔVdB, ΔT, 1/ ΔT, ΔT%, Δθ
Cursor Resolution1/100 DIV
Effective Cursor RangeVertical: ±3div ; Horizontal: ±4 div
Panel Setting DisplayVertical: V/div(CH1,CH2),UNCAL,ALT/CHOP/ADD,INV, probe factor,AC/DC/GND 
Horizontal: s/div(MTB, DTB), UNCAL, x 10MAG, delay time , HO
Trigger: source, coupling, slope, level, TV-V, TV-H
Others: X-Y lock, save/recall MEM 0-9 (GOS-6103/GOS-6103C)
AUTO MEASUREMENT FUNCTION (GOS-6103C)
Parameter FunctionFREQ, PERIOD, ±WIDTH, ±DUTY (+ or - polarity selected by trigger slope)
Display DigitsMax. 6-digits, decimal
Frequency Range50Hz ~ 100MHz
Accuracy1kHz ~ 100MHz : 0.01% ; 50Hz ~ 1kHz : 0.05%
Measuring Sensitivity> 2 div (Measuring source selected from CH1 and CH2 as synchronous signal sources)
SPECIAL FUNCTION
TIME/DIV Auto RangeProvided (GOS-6103/GOS-6103C)
Panel Setting Save & Recall10 sets (GOS-6103/GOS-6103C)
Panel Setups LockProvided
POWER SOURCE 
 AC 100V/ 120V/ 230V±10% , 50/60Hz
DIMENSIONS & WEIGHT 
 310(W) x 150(H) x 455(D) mm; Approx. 9kg

Customer Reviews (0)

No reviews yet. Be the first to review this product!

Related Products