Convenient
Functions | -Long Memory Max. 32KBytes/CH for flexible Waveform Zoom In/Out
-Direct Single Trigger Capture Function using a hot-key
-Simultaneous 5 Waveform informations
-Auto Measurement and FFT Analysis
-Auto Trigger Level Setting to 50%
-Saving 10 Waveforms & setup parameters
-Convenient inserting interface card for RS-232C, Hardcopy and USB |
| ACQUISITION | Max. sample rate
| 200MSPS for one channel only, 100MSPS/CH (real time),
25GSPS/CH (equivalent) | Record length
| Long Memory Max. 32kBytes/CH, Wide Waveform Zoom In/Out | Peak defect
| Capture & displays event as narrow as 10ns GLITCH | |
VERRICAL
| Frequency
bandwidth | DC-250MHz | | Input channel | CH1, CH2 | | VOLTS / DIV | 2mV.DIV~5V/DIV | | Input impedence | 1 Mohm // Approx. 20pF | | Max. input volt | 300V (DC+AC Peak) (AC < 1kHz) | | Accuracy | 3% | | Input coupling | DC, AC, GND | | Rising time | Approx. 2.3ns | |
MATH
| -Arithmetric(ADD, SUBSTRACT, INVERSION)
-FFT : Hamming, Hanning and Retangular window |
HORIZONTAL
| TIME / DIV
| Equivalent 2ns/div ~ 0.1μs
Realtime 0.25 μs/div~0.1s/div
Roll mode 0.2s/div~5s/div | Resolution
| 80ps | Accuracy
| 0.01% | Pre trigger
| Max. 10div | magnification
| ZOOM IN/OUT | |
TRIGGER
| | Mode | AUTO, NORMAL, SINGLE | | Coupling | DC, AC, LF REJECT, HF TRJECT | | Type | EDGE, TV | | SLOPE | + or - | | Level | Manual setting or Automatic 50% setting | | Source | CH1, CH2, EXT, LINE | Sensitivity
| | TRIGGER | FREQUENCY | SENSITIVITY | | 5mV~5V/div | 2mV/DIV | INTERNAL
(CH1, CH2)
| DC~20MHz | 0.5 DIV | 0.5 DIV | | 20MHz~80MHZ | 1.5 DIV | | | 80MHz~150MHz | 2.0 DIV | | EXTERNAL | DC ~ 10MHz | 0.2 Vp-p | | |
DISPLAY
| 5.7" MONO LCD (320 X 240) |
MENU
| Display
| Type Dots, Vectors
Format X-Y, Y-T
GRID Full, Cross, Board
Contrast Control possible | SAVE / RECALL
| 10 Setup, 10 Waveforms
This function is able to save waveform and setting state of present working environment and recall by the user.
Factory setup recall | UTILITY
| Self Calibration
System condition | Cursor
| Type : time, frequency, Voltage
Source : CH1, CH2 | Measure
| Max. 5 parameter auto measurement
(pk-pk, RMS, Mean, Frequency, Rising time, Falling time, period, Positive width, Negative width, Duty) | |
HOT-KEY
| | AUTO SET | VARTICAL, HORISONAL & Trigger setting | | RUN/STOP | Waveform hole | | SINGLE | Bandwidth 10MHz | | HARDCOPY | Hardcopy through printer port or RS-232 port for thermal printer | |
POWER
| | Power supply | 90V AC ~ 250V AC | | Frequency | 48Hz ~ 440Hz | | Power consumption | 30W | |
| WEIGHT | -6kg |
SIZE
| -338(W) x 167(H) x 371(L) |
EMC
| -CE (EN55011, EN50082-1) |
| SAFETY | -CE (EN61010-1), meet UL3111-1 |
